new generation controller
TORP TC500 2.0
FULLY COMPATIBLE WITH SURRON LIGHT BEE / SEGWAY X260, TALARIA MX3/MX4/MX5 AND THE TORP TM25 MOTOR
Powerful
27 kW
Light
1 kg
Plug & Play
Ready in 20 minutes
warranty
2 years
From our webshop to your doorstep in just 3-5 days!
new generation controller
TORP TC500 2.0
The TORP TC500 2.0 controller is made to upgrade your e-bike to an electric beast, be it on the road or at the tracks!
next-level innovation.
Revolutionary features that transform your riding experience with unprecedented control and performance.
WHEELIE CONTROL
Advanced stability control for perfect wheelies and enhanced riding dynamics.*
Latest Automotive standard throttle support
Precision control with redundant throttle inputs for maximum safety and responsiveness.
Rugged & reliable
Built to conquer the toughest terrain effortlessly, with industry-leading overcurrent protection that reacts in under 1 μs.
Sensorless Motor Temp Protection
Only Torp controllers offer true sensorless motor temperature protection. Even if the temp sensor fails under heavy load, your motor stays safe and functional, saving you from sensor swaps or buying a new motor.
*Launch & Lift assist will unlock with the software update in Spring 2026. Operated with a Torp Full-color display.
IMPORTANT: The TC500 controller is not compatible with the TM40Pro and TM50Pro motors. For these, you will need a TC1000 controller.
FOC technology assures the smooth and predictable power-curve from the beginning to the end of the ride. In combination with a custom 72V battery, you will be able to boost the power of your e-bike up to 27kW! More specifications here.
Plug & Play in the true meaning of words. No previous knowledge of electronics is needed to install. Just follow the installation manual and you are set to go in less than 20 min! We did all the tiresome tuning and configuration for you, so you don’t have to.
DON’T LOSE FACTORY-SET FEATURES.
Kick Stand Sensor
.
Crash Sensor
POWER MODE BUTTON
.
STOCK DISPLAY
.
Brake Switch
In Tune with stock battery
*Each feature can be easily disabled through our App.
in tune with
the stock
battery.
Torp controllers are the only after-market controllers that communicate with stock SurRon and Talaria BMS. This unique feature enables the Controller to track battery temperature and cell voltage. It can also adjust the power according to the data it receives from the BMS. All the stats can be accessed through the App.
change your settings through the app.
Although the Controller is pre-configured for SurRon/Segway and Talaria bikes, you can change features and power settings through a user-friendly mobile App.
With the mobile App, available for iOS and Android phones, you’ll have all the important stats in the palm of your hand.
Click to install:
WHAT POWER CAN I EXPECT?
TC500 for SurRon LB
| Stock controller + Stock Battery | 4,8 kW |
| TC500 + Stock Battery (32 Ah / 34 Ah / 40 Ah) | 7 kW |
| TC500 + Stock 38 Ah Battery (depending on the battery manufacturer) | 8,5 kW |
| TC500 + Custom 60 V Battery** | 13,5 kW |
| TC500 + Custom 72 V Battery | 17 kW |
| TC500+Custom 72 V Battery + TM25 | 27 kW |
| TC500+Custom 80 V Battery + TM25 | 30 kW |
*There is no need to bypass the battery with the TC500, but in case you use the bypassed battery, the TC500 controller will work with it as well.
**Depending on the voltage sag.
TC500 for Talaria MX3
| Stock controller + Stock Battery | 6 kW |
| TC500 + Stock Battery | 8 kW |
| TC500 + Custom 60 V Battery** | 13,5 kW |
| TC500 + Custom 72 V Battery | 17 kW |
*There is no need to bypass the battery with the TC500, but in case you use the bypassed battery, the TC500 controller will work with it as well.
**Depending on the voltage sag.
TC500 for Talaria MX4
| Stock controller + Stock Battery | 7 kW |
| TC500 + Stock Battery*** | 11,5 kW |
| TC500 + Custom 60 V Battery** | 15 kW |
| TC500 + Custom 72 V Battery | 18 kW |
*There is no need to bypass the battery with the TC500, but in case you use the bypassed battery, the TC500 controller will work with it as well.
**Depending on the voltage sag.
***Important: Currently the controller CAN NOT communicate with the stock Talaria battery produced by SCUD. Other controller functionalities are intact. Click for more information.
TC500 for Talaria MX5
| Stock controller + Stock Battery | 13,4 kW |
| TC500 + Stock Battery*** | 17 kW |
| TC500 + Custom 72 V Battery** | 20 kW |
*There is no need to bypass the battery with the TC500, but in case you use the bypassed battery, the TC500 controller will work with it as well.
**Depending on the voltage sag.
***Important: Currently the controller CAN NOT communicate with the stock Talaria battery produced by SCUD. Other controller functionalities are intact. Click for more information.
IMPORTANT: All estimated power outputs (except the TC500 paired with an 80V battery) apply to both TC500 1.X and TC500 2.X controllers. The 80V battery setup is supported only by the TC500 2.X generation.
need more power?
Check out the TC1000 controller!
SPECIFICATIONS.
– Field-oriented control (FOC)
– Supported batteries: from stock 60V up to 80V nominal 22S (92,4V fully charged)
– Max Power: 27 kW*
– Sensored (HALL Encoder) and sensorless control
– Max Battery Current: 350 A*
*In combination with:
- the stock SurRon e-motor, the max power is 17kW
- the stock Talaria MX4 e-motor, the max power is 18kW
- TM25 motor, the max power is 27kW
– Max phase current: 500 A
– Efficiency up to 99%
– Working temperature: from -15 to 75 °C
– Bluetooth communication
– Pre-calibrated: No additional steps required
– Overcurrent, overvoltage, undervoltage and overtemperature protection
– Communication with stock BMS
– Different regenerative braking and throttle modes
– Weight: 1 kg
– Features: Mobile App (iOS & Android), stock SurRon display
– Protection class: IP67*
– Regular firmware updates
* While Torp controllers are rated IP67, making them highly water-resistant, the wiring harnesses for both the controller and bike are not waterproof. In case your bike is exposed to water in any way, it is mandatory to apply dielectric grease inside all connectors. The warranty does not cover malfunction or damage arising from the use of the motor controllers in activities where frequent or extended submersion in water is expected, such as riding in streams, rivers, or flooded areas. Over time, seals and components may degrade, reducing the water-resistant effectiveness of the product. Damage resulting from this natural wear and tear is not covered by the 2-year warranty.
contact us.
Feel free to contact us via the contact form for new inquiries, cooperation or technical questions.
Torp d.o.o.
Ribarska 1a
51000 Rijeka, Croatia
